RECENT PROJECTS

Refrigeration PM

The humidors were struggling with deteriorating filters that could compromise the quality of the stored items. We addressed this by adding battery treatment to both units and removing all debris. Additionally, we installed a gateway and a Monit sensor to enhance monitoring capabilities, ensuring optimal performance and longevity of the humidors.

Walk in Cooler Repair

Upon arrival, we found the box temperature exceeding 60 degrees, indicating a malfunction. We replaced the faulty defrost timer and applied Viper coil cleaner to both the condenser and evaporator coils. Although initial compressor sounds were concerning and cooling was gradual, the box temperature was reduced to 49 degrees by the time we left, with a recommendation for proper drain line modifications to enhance functionality.

Refrigeration Repair

A malfunctioning deli cooler was impacting food preservation. We addressed the issue by removing the old refrigerant and replacing the filter drier. The system was pressurized and vacuumed to ensure there were no leaks, followed by charging it with 9 lbs of R134a to manufacturer specifications. Additionally, we adjusted the humidor's differential for optimal performance.

Walk in Cooler Repair

A malfunctioning room temperature sensor was causing inconsistencies in cooling for the master coil of system three. We successfully replaced the sensor, adjusting the temperature setting from 34° back to the optimal 35°. This repair ensures that the cooling system operates efficiently, maintaining the desired environment in the walk-in cooler.

Quarterly PM

Multiple problems arose in the five breakrooms, with malfunctioning reach-in coolers and ice machines. We efficiently serviced all units, ensuring each ice machine was thoroughly cleaned with the appropriate chemicals, focusing on both the ice machines and condenser coils, resulting in fully operational equipment ready for daily use.

Refrigeration Repair

Ice buildup on the C3 spinach room coil was obstructing proper function, while the R&D freezer was experiencing insulation icing. We conducted a comprehensive leak search, finding and resolving leaks at key valve points. Additionally, we inspected several fans, noted the missing blade on D1-4, and ensured all other components were functioning efficiently in the facility.

HVAC & Refrigeration Service

An issue with the air conditioning system prompted our visit. We performed comprehensive checks on the air conditioner, including testing capacitors and amp draws, and washing the condenser. We swapped out the filter and evaluated the reach-in coolers and freezers, noting that Cooler B was operating at 32 degrees instead of the desired 38. Additionally, we cleaned the swamp cooler, tested the fume hood fan, and ensured all belts were in good condition with no other issues found.

Ice Machine Service/Repair

An accumulation of dirt and bacteria in the ice machine prompted us to schedule a thorough cleaning. We initiated the wash cycle with a specialized cleaning solution, spraying down all auto parts and wiping them off with a sanitizing agent. Additionally, we flushed the condensate line and washed the washable filter, followed by a visual inspection of the machine's operations and components to ensure everything was functioning properly.

Appliance Repair

An issue with the oven's igniter required our attention. After thorough diagnostics, we discovered that while the igniter functioned during broil, it failed to activate during bake, indicating a bad control board. We educated the customer about the repair options, and they decided to weigh their choices after paying the service fee.

Ice Machine Repair

An ice machine not receiving water can disrupt essential operations. We diagnosed the issue, finding that the water filter was plugged, which we replaced. However, the problem persisted, leading us to identify that the inlet water valve was faulty. We determined that this valve would need to be replaced to restore the machine's functionality.

Bi Annual PM

The ice machine in the kitchen was not functioning properly, causing concern for ice availability. We thoroughly serviced the unit by cleaning and washing it with chemical cleaners, restoring its performance. After the cleaning, the machine began making ice again. Additionally, we cleaned the air filter to ensure optimal airflow and efficiency.

HVAC Repair

A malfunctioning wall unit disrupted climate control. We diagnosed the issue, discovering a bad blower motor, and successfully installed a new wall unit. After installation, we verified that both heating and cooling modes were operating normally, ensuring comfortable conditions for the room.

Walk in Cooler Service/Repair

A leak at the condenser unit's suction line led to an urgent need for repair. We addressed this issue by recovering the existing refrigerant and replacing it with 8lbs of R427, strictly adhering to the specified limit. During our service, we discovered a failed inverter, which was quoted for replacement to ensure the system operates effectively after the refrigerant was restored.

Walk in Freezer Service/Repair

When the walk-in freezer stopped cooling, we promptly diagnosed a failing condenser fan motor as the culprit. To address the issue, we ordered the necessary special parts and temporarily bypassed the problem by using a box fan and extension cords to maintain low temperatures until the new components arrived. This ensured the integrity of stored goods during the repair process.

Refrigeration Service Call

A situation arose that required monthly project management services to maintain efficient operations. We meticulously monitored progress, coordinated schedules, and addressed any challenges, ensuring that all project goals were met seamlessly. Our dedicated efforts provided clarity and direction, facilitating a productive environment for ongoing work in Modesto, CA.

No Heat Service Call

A heating issue was reported, indicating no heat was being produced. We arrived on site in Oakdale, CA, prepared to assess the situation. Although no specific work was performed, our evaluation determined the underlying problem, setting the stage for effective repairs in the future.

They provided prompt service on the day that I called. Another part was needed and Charles worked really hard to get it and even called me on a Sunday to schedule the second service. Both technicians were knowledgeable, courteous and helpful. The price was reasonable for the work. They were honest and I felt that they cared about fixing the issue as soon as they could.

HVAC Repair

An AC unit in Waterford, CA was experiencing operational issues, prompting the need for service. We diagnosed the system to identify any underlying problems. Our skilled technicians checked all components and ensured everything was functioning efficiently, setting the stage for optimal cooling performance in the warm months ahead.

Walk in cooler repair

Inoperable cooling in the walk-in cooler warranted immediate attention. We replaced the universal evaporator fan motor, ensuring it was set for 208v operation. Additionally, we cleaned the evaporator using Viper and a sump pump to enhance efficiency and performance, addressing both the mechanical issue and the system's cleanliness in one fell swoop.

Quarterly Refrigeration PM

An error code on the ice machine required our attention during the January Quarterly PM. We conducted a thorough inspection of the ice machine, reaching cooler, walk-in freezer, and milk cooler, checking temperatures and electrical components. After cleaning the condenser coils and addressing sanitation needs, we discovered a water filter issue, which was replaced the following day. Testing confirmed the ice machine was operating efficiently.

Ice Machine Repair

An ice machine malfunction was preventing the production of ice. We conducted a deep cleaning by removing the machine's parts and thoroughly washing them with a calcium solution. After running the machine with this solution, we followed up with a sanitizing solution to ensure optimal performance. The system is now operational and capable of producing ice efficiently.

Walk in Cooler Repair

A malfunctioning walk-in unit was leading to ice accumulation and inadequate refrigeration. We removed the accumulated ice using a steamer and accessed the tight condenser area to test the defrost timer and heating elements. After replacing the faulty defrost termination switch and resetting the defrost cycle, we verified optimal system pressures, restoring the unit's functionality with no ice on the evaporator.

Great service and always available when I need them

HVAC Diagnostic

An HVAC system diagnostic was needed to resolve performance issues affecting the home’s comfort. We conducted a thorough assessment, identifying key areas of concern. After our evaluation, we generated an invoice detailing the diagnostic findings, ensuring transparency in the services rendered while addressing any operational inefficiencies.

Walk in Cooler repair

Experiencing cooling issues in the walk-in cooler, we discovered a seized fan motor, which caused the start capacitor to fail. We replaced both the fan motor and start capacitor, ensuring optimal functionality. Following our repairs, the walk-in cooler is now effectively cooling and operating without any problems.

I called they came and got my walk-in cooler fixed Very good customer service

HVAC Service/Repair

An issue with the heating unit required our attention, as it was making a loud buzzing noise during operation. After accessing the roof and inspecting the unit, we replaced the old filters and tightened the loose blower belt. Additionally, we replaced the faulty blower contactor with a new 3-pole 50 amp 24v coil. The unit is now operating correctly, ensuring reliable heating.

Quarterly Refrigeration PM

We identified and addressed a leak issue at the refrigeration rack. After conducting an extensive leak search, we thoroughly checked the pump system, cleaned the tower, and inspected coil operations, ensuring all fans were running efficiently. While all coils were functioning within temperature specifications, we noted that the coils inside the #3 cooler require a wash in the coming months for optimal performance.

Reach in Cooler Service/Repair

The Dress Table was not cooling properly, presenting a significant issue for food preservation. We arrived and found the head pressure exceeding normal levels. After thorough checks of the electrical components and confirming all fans were operational, we performed a deep clean of the condenser using CO2 and Viper coil cleaner. This service effectively reduced the head pressure by 100 and the suction pressure by 30, restoring optimal cooling functionality.

Washer Repair

An appliance in need of repair was causing inconvenience and disruption. We promptly diagnosed the issue affecting its performance and provided the necessary repairs to restore its functionality. This level of service aims to enhance the appliance's efficiency, ensuring it operates smoothly for daily use.

Bi Annnual Maintenance

Winter maintenance issues required immediate attention as multiple system components needed inspection. We changed filters and belts, verified temperature settings, and examined the electrical systems, including burners and blower compartments. Additionally, we ensured the condensate line was functioning properly to maintain optimal operation in the Modesto CA climate.

Quarterly Refrigeration PM

Two ice machines required preventive maintenance to ensure optimal performance. We emptied the bins, ran a calcium solution and sanitation cycle, and cleaned the outer parts with a sanitizing solution. Additionally, we washed the condenser coils using a specialized condenser solution to enhance efficiency. This thorough maintenance helps extend the lifespan of the machines, providing reliable service.

Refrigeration Service/Repair

A malfunction in the Century refrigeration unit left it with no power. Upon inspection, we discovered the controller was receiving 28v but showed no output or display, and had no internal fuse. To resolve this issue, we recommended a controller replacement to restore functionality to the unit.

Reach In Cooler Service/Repair

A malfunctioning reach-in cooler was unable to maintain optimal temperature, risking food safety. We removed the old control board and replaced it alongside a temperature sensor. After installing the new components, we tested the unit to verify its functionality. It began cooling effectively, although we advised that reopening the door would affect the temperature drop, as no products were inside.

HVAC Service/Repair

An HVAC unit on the roof needed servicing after a successful call for heat. We thoroughly tested all electrical components and safeties, finding no issues. All filters were replaced to ensure optimal performance, maintaining a comfortable environment for the property in Antelope, CA.

HVAC Service/Repair

The HVAC system was experiencing issues with no cooling or fan operation. We arrived on-site and discovered that the 24V transformer had tripped. After resetting it, the cooling function resumed, but the transformer tripped again in heat mode. Upon investigation, we found a direct short in the W thermostat wire. We replaced it with an orange wire, resolving the transformer issues and ensuring all cooling and heating components operated correctly. However, we noted an erratic thermostat temperature reading and recommended its replacement.

HVAC PM

Two HVAC units required servicing to ensure optimal performance during colder months. We replaced all filters to improve air quality and tested each unit's heating capabilities. Both systems are now functioning smoothly, providing reliable heat without any issues, ensuring comfort for those in Oakdale, CA.

Walk in Freezer Service/Repair

A malfunctioning walk-in freezer was compromising the integrity of stored goods. We assessed the problem and executed a thorough diagnostic to identify the necessary repairs. No additional work was needed at that time, ensuring the freezer remained efficient and functional for all operations in Elk Grove, CA.

Monthly HVAC PM

We identified issues with the humidor systems while conducting a comprehensive monthly PM in San Jose, CA. After thorough leak detection and electrical inspections, we drained and replenished the cooling tower and cleaned several components, including dock coils and evaporator coils. Additionally, we discovered a malfunctioning float valve in the left humidor and a non-operational heater in the right humidor, suggesting the need for improved filtration to combat hard water buildup.

HVAC PM

The RTU unit required thorough maintenance to ensure optimal performance. We changed the filters, flushed the condenser lines, and checked temperatures, pressures, motors, capacitors, and belts. After conducting a visual inspection, we ran the system to confirm it was operating properly, ensuring reliability for the upcoming season.

Refrigeration Repair

The reach-in freezer presented a significant issue with broken hinges on both the top and bottom of the right side door. We assessed the situation thoroughly and documented the damage with photographs. To restore functionality, we replaced both the top and bottom hinges, ensuring the door operates smoothly and securely, thus preventing further issues.

Quarterly HVAC PM

A performance issue with the rooftop unit prompted us to perform crucial maintenance. We changed the air filters, thoroughly washed the condenser coil, and cleared the condensate line. Additionally, we inspected all components, including capacitors and motors, while checking temperatures and pressures. After running the system, we confirmed proper operations, ensuring optimal functionality for the unit in La Jolla, CA.

No Heat Service call

The heating system was failing to operate due to a malfunctioning ECM motor. We diagnosed the issue and confirmed the need for a replacement. After obtaining approval, we replaced the faulty ECM blower motor with a new unit. Following the installation, we conducted thorough testing to ensure all operations were functioning normally, restoring warmth to the apartment.

Quarterly Refrigeration PM

A faulty capacitor was affecting the performance of the package unit at the Turlock location. We conducted a thorough PM check on compressors and motors, confirmed all were functioning normally, and identified a 70+5 microfarad dual capacitor that needed replacement. Filters were changed, and the Manitowoc ice maker was cleaned after clearing three harvests. We noted condensation issues on the display case, which were due to excess heat from the kitchen; installing a heating element for the sliding windows is recommended to resolve this.

Monthly HVAC PM

Issues with the dock coil prompted our timely service. We arrived on site to thoroughly wash the coil and pan, ensuring efficient operation. After checking the underfloor heating and sump container, we conducted condenser checks and leak searches with no leaks detected. We replaced a faulty 5 mfd capacitor and performed temperature calibrations to optimize performance, despite the scissor lift’s limited charge.

Quaterly PM

A malfunctioning cold control in the reach-in cooler was causing a 30-minute delay before activation. We cleaned built-up debris around the condenser, replaced the cold control, and ensured it was set correctly. We also conducted a leak check on the walk-in unit, added refrigerant, and cleaned the rooftop condensers, ensuring all units were operating effectively.

Appliance Repair

The built-in oven was malfunctioning due to a faulty control board, impacting its performance. We expertly replaced the old control board with a new unit, ensuring all connections were secure. Following the installation, we thoroughly tested the oven, confirming it was functioning properly, allowing for smooth cooking operations once again.

Refrigeration Service/Repair

An icing issue with one of the two evaporator coils for C3 was reported in the Spinach (WIP) room. We observed that the coil had been accumulating ice since yesterday. Due to the presence of equipment and personnel on the floor, further diagnosis was not feasible at that time. We recommended rescheduling the service for the weekend, when conditions would allow for a thorough inspection and repair.

Ice Machine Repair

An ice machine was not properly harvesting ice, causing operational issues. We diagnosed a faulty ITP sensor and replaced it, leading to thicker ice production. However, the unit still struggled to drop ice and repeatedly shut off on a full bin. We performed a thorough cleaning using Manitowoc descaler, but ultimately recommended replacing the ice machine's evaporator grid for optimal performance.

Walk in Freezer Service/Repair

A malfunctioning walk-in freezer was not cooling properly, which posed a risk to stored items. We located a leak at the condenser Schrader valve, tightened it to stop the leak, and installed new caps. Additionally, we added 3 pounds of 404 refrigerant to restore optimal temperature levels and advised a follow-up visit in a week to ensure continued performance.

HVAC Service/Repair

The AC unit in the production office was not operational due to a tripped transformer and a chattering contactor affecting the compressor. We addressed the issue by swapping out the faulty contactor and meticulously checked the 24 V loop throughout the system to confirm there were no pinched or broken wires. This ensured the AC system in Modesto, CA, was functioning properly again.

HVAC Repair

An HVAC issue was evident with insufficient cooling in the home, impacting comfort levels. We diagnosed the problem and proceeded with the necessary repairs to restore efficient operation. Utilizing high-quality materials, we ensured that the HVAC system operates smoothly, enhancing indoor air quality and climate control throughout the building.

Appliance Repair

An oven malfunctioning due to a faulty safety valve can disrupt kitchen routines. We tackled this issue by replacing the defective valve with an OEM part. After installation, we conducted thorough gas leak tests using bubbles, confirming no leaks present. Finally, we ensured the pilot light was functioning properly, allowing it to stay lit consistently.

Ice Machine Service

Two ice machines were performing inadequately due to lack of maintenance, affecting the operation of four reach-in coolers. We executed a complete PM, running a wash cycle with descaling solution, cleaning outer parts with a sanitizing solution, flushing the condensate line, and replacing both water filters. We also conducted visual inspections and operational checks. Additionally, we returned to the coolers to verify temperatures, operational efficiency, and cleaned the vapor coil while inspecting the drains.

HVAC Repair

A split system issue was impacting the HVAC performance, with a damaged thermostat and torn seal tight tubing. We repaired the thermostat wires, ran them through new seal tight tubing, and secured it with zip ties. Additionally, we taped the outer wall where the tubing passes through and replaced the damaged Armaflex insulation to enhance system efficiency.

Refrigeration Repair

A critical communication loss occurred with the CPC controller affecting all remote boards. We accessed the system remotely to diagnose the issue, resetting the controller but noting persistence in the problem. After backing up the program, we identified loose connections in the control wiring, which were tightened to restore communication. To enhance reliability, we installed a new protected ethernet cable, securing it properly for long-term stability.

Bi Monthly HVAC PM

Rooftop units were experiencing operational issues that required our immediate attention. We performed preventive maintenance on three units, changing out filters and checking temperatures and pressures. Additionally, we inspected all electrical components and measured amp draws on the motors. A thorough vision inspection confirmed optimal operation, ensuring the systems are running efficiently.

Refrigeration Repair

Multiple leaks were detected from the insulation of a reach-in cooler due to a plugged drain line. We cleared the drain using CO2, restoring proper water flow. During our walk-in service, we found the middle evaporator coil completely frozen with an error code indicating low superheat. The rooftop condenser compressor was iced up from flooding, but all electrical components were operational. After checking pressures, motors, and belts, we advised the customer to turn off the condenser to allow for thawing, preventing further issues.

HVAC Repair

Water pooling in the emergency pan indicated a malfunctioning air handler. We diagnosed the issue by testing the drain line and promptly addressed the leak to restore proper function. This work ensures that the air handler operates efficiently, preventing future water issues and potential damage to the surrounding area.

HVAC Service

An issue with the HVAC units emerged during inspection, particularly with the kitchen AC unit showing a 24 V short on the transformer. We thoroughly assessed all HVAC units and recommended preventative maintenance service to ensure optimal performance. The transformer issue can be addressed in the scheduled PM service, ensuring the entire system runs efficiently.

HVAC Repair

Condensate lines were plugged, leading to water backup and inefficient HVAC performance. We performed a thorough diagnostic, utilizing nitrogen to unclog the lines from both inside and outside. After clearing the blockage, the system was restored to proper functionality, ensuring efficient drainage and optimal HVAC operation.

Quarterly PM

A malfunctioning display and lack of voltage in the AC unit in Starch Room 1 prompted our attention. We serviced all panel AC units, addressing issues across multiple locations, including mounting a dismounted condenser fan and replacing a missing filter in the gluer unit. Our thorough inspection ensured each unit's functionality, identifying critical power concerns while leaving the customer with no immediate recommendations needed.

Bi Annual PM

An ice machine malfunction was impacting operations. We conducted a thorough preventive maintenance check on the Norpole ice machine, running a water cycle with a calcium solution, and using a sanitation solution to clean the auto parts and bins. We washed the washable filter filters, flushed the condense line, and checked overall operations to ensure optimal performance.

Refrigeration Repair

An aging refrigeration controller needed to be addressed, leading us to remove the existing unit for refurbishment. We then shipped it to the specialized company for rebuilding, ensuring it met quality standards. After receiving the rebuilt controller back, we expertly re-installed it and carried out thorough testing and troubleshooting to guarantee optimal operation, fitting seamlessly within the refrigeration system in Fairfield, CA.

Job in Modesto

An urgent HVAC repair was necessary to address a malfunctioning heating system in a home. We promptly assessed the situation and identified the underlying issues. Utilizing high-quality materials, we expertly performed the necessary repairs to restore comfort to the residence in Modesto, CA, ensuring the heating system operated efficiently once again.

Due to our home warranty fiasco Pro Edge has been extremely amazing!!! Can’t even begin to tell you how much Chuck worked to get the warranty company to do the right thing to no avail 🤔😢 He’s honestly one of the most humble, honest & caring human I’ve seen owning a business. Beyond his control & the terrible lack of integrity from Choice home warranty we are now after 2 1/2 months getting our HVAC installed by paying the full price! He deserves our business & anyone who needs his services. In all this time he brought 2 standing room air conditioners; one he had his technician go purchase that day for us to get some relief. We had triple digit weather & I’m elderly with health issues & it really helped us. Chuck will go through hoops to help in difficult situations & will fight for you. Thank you Chuck from the bottom of our hearts & to all your technicians who are very kind & professionals

Reach in Cooler Service/Repair

An inefficient reach-in cooler raised concerns about maintaining optimal temperature for food storage. We conducted a thorough assessment to identify the underlying issues. Although no repairs or service actions were performed during this visit, we provided expert insights on the cooler’s functionality to ensure it operates effectively in the future.

Monthly Refrigeration PM

We addressed the maintenance needs of 5 ice machines and 6 refrigerators/freezers in Modesto, CA, ensuring optimal performance. Our thorough process included running a wash cycle with citation solution, spraying parts with Santa solution, and flushing condensate lines. We also blew out condenser coils, checked temperatures, and conducted comprehensive visual inspections on all components, guaranteeing reliable operation.

Walk in freezer repair

A malfunctioning walk-in freezer door needed attention after it was previously fixed by a sheet metal technician. We determined that no additional repairs were required for the door; however, we noted the need for floor repairs.

Quarterly Refrigeration PM

An ice machine in Modesto, CA, required thorough maintenance to ensure optimal performance. We serviced the machine by washing the filter, flushing the condensate line, and running a water cycle with a calcium solution. All parts were cleaned with a sanitizing solution, and ice was removed and the bin sanitized. Operations were checked, a visual inspection was conducted, and we recommended adding a water filtration system.

Ice Machine Repair

An ice machine in need of repair was failing to function properly, disrupting essential operations. We assessed the situation, identified the necessary materials, and executed repairs effectively, billing the time and materials utilized. This ensured that the ice machine was restored to full working order, allowing for seamless service in Modesto, CA.

Industrial Refrigeration Repair

A malfunctioning cooler in Building C prompted our intervention. We diagnosed the right side of the Century condenser, which was locked out due to low pressure. After unsuccessfully resetting it, we bled the high side into the low to enable the system to reset. The left side remains off due to a faulty controller on order. We installed an upgraded program provided by Century, yet the system experienced another low pressure lockout that we also resolved by bleeding pressure. We will continue to monitor its operation closely.

Quarterly Refrigeration PM

Two ice machines were experiencing operational issues that needed attention to ensure consistent ice production. We performed comprehensive preventative maintenance on both units, including inspections and necessary adjustments.

HVAC Repair

A leak caused by dripping from an attic fan was leading to water puddling in the corner of the return grill. We diagnosed the noise and dripping issue while noting that the HVAC unit was located over 10 feet away, so it wasn’t at fault for the leak. To address the source, we recommended a roofer to resolve the roof leak and provided videos for reference.

HVAC Repair

An HVAC system with inadequate airflow was causing discomfort throughout the house. We serviced the split system by cleaning dust from the return grills, significantly improving air circulation. After ensuring all electrical components were secure and checking the voltage levels, we replaced the filter with a properly sized one, leaving the unit efficient and ready for the next tenant.

HVAC Diagnostic

A Package unit was in need of servicing, as it was under pressure to maintain efficient cooling. We meticulously tested the electrical components, amperage, and refrigeration systems, ensuring everything operated smoothly. Our diagnostics revealed no issues, and we confirmed the unit was effectively supplying the home comfortable temperatures.

Reach in Freezer Repair

Encountering issues with the reach-in freezer can disrupt operations significantly. We addressed the situation by thoroughly assessing the system to identify the underlying problems. After diagnosing the issues, we efficiently billed for the service call and time spent, ensuring the customer was fully informed of the work performed to restore the freezer's functionality.

Quarterly HVAC PM

Encountering issues with the reach-in freezer can disrupt operations significantly. We addressed the situation by thoroughly assessing the system to identify the underlying problems. After diagnosing the issues, we efficiently billed for the service call and time spent, ensuring the customer was fully informed of the work performed to restore the freezer's functionality.

Ice Machine Repair

An ice machine malfunctioning can disrupt any establishment relying on consistent ice production. We addressed the issue effectively with a thorough service call that included diagnosing the problem and performing necessary repairs. Utilizing the right equipment and parts for optimal functionality, we ensured the ice machine was restored in peak condition, ready to serve the needs of the business.

Walk in Cooler Repair

A walk-in cooler was unexpectedly turned off, leading to concerns about temperature management. We diagnosed the issue, finding that the breaker was easily accessible and operational. However, access to the rooftop condenser required a scissor lift, which the staff could not allocate time for. The box temperature was at 35°F with the evaporator air at 34.5°F, indicating a need for further evaluation.

Appliance Repair

The fly fan was non-operational, leading to concerns about potential system failures. We discovered that a 20 amp breaker had tripped, which we promptly reset. Following this, normal operations resumed. However, to ensure long-term reliability, we recommended replacing the fly fan to avoid future disruptions.

Appliance Repair/Service

The washing machine experienced a lid that was stuck closed, preventing normal operation. We initially installed a new door locking mechanism but found that further diagnostics were required. After testing, we discovered an issue with the drain sequence and confirmed voltage to the pump. Installing a new part allowed the machine to run but introduced a new error code, necessitating additional adjustments.

Coil Service/Repair

A malfunctioning coil system was affecting the efficiency of two Fujitsu units. We systematically removed the condenser framing and utilized viper coil cleaner for a deep clean, followed by a CO2 blowout to clear debris from the coils. Our thorough process included testing the drain pan heater and the operational status of both units, ensuring optimal performance and reliability.

Appliance Repair

An appliance malfunction was disrupting daily routines, prompting the need for thorough inspection and repair. We assessed the issue and performed precise diagnostics to identify the root cause. Our skilled technicians applied their expertise to resolve the problem efficiently, restoring functionality to the appliance and ensuring it operates smoothly once again for the customer in Lathrop, CA.

HVAC Service/Repair

An issue with the mixing air unit required our attention to ensure proper ventilation. We serviced the unit and tested its operation through the toggle switch. Upon activation, the damper energized successfully, confirming that air was being effectively supplied to the building. With no issues found, the system is now functioning optimally in Sacramento, CA.

Quarterly Refrigeration PM

An ice machine in the kitchen was underperforming, showing symptoms of a low charge and long freeze cycles. We provided comprehensive service, sanitizing the unit, removing all ice, and confirming ice production. Additionally, we serviced multiple reach-in coolers and freezers, ensuring optimal temperatures and clear evaporators. It is recommended to replace the ice machine to maintain efficiency.

Water Heater Repair

The water heater was found locked out and unresponsive despite attempts to reset the ignition controller. After thorough diagnostics, we concluded that the primary ignition controller needed replacement. We installed a new Carlin controller, then tested the unit to ensure it no longer experienced lockouts when calling for heat.

HVAC PM

The HVAC system required maintenance to ensure optimal heating performance. We conducted a thorough inspection of the furnace operation and confirmed it was efficiently providing heat throughout the building. During our preventative maintenance, we cleaned the burner compartment and meticulously tested all heating components, identifying no issues. This comprehensive service maintains comfort and efficiency for the facility.

Quarterly Refrigeration PM

Facing significant mineral buildup, we addressed the ice machine issues by performing a deep clean with ice machine sanitizer. After completing the clean cycle, the unit successfully produced two batches of ice. To enhance functionality, we recommended fixing the drain line with specified materials and used CO2 to clean the condenser for optimal performance.

Monthly HVAC PM

Facing significant mineral buildup, we addressed the ice machine issues by performing a deep clean with ice machine sanitizer. After completing the clean cycle, the unit successfully produced two batches of ice. To enhance functionality, we recommended fixing the drain line with specified materials and used CO2 to clean the condenser for optimal performance.

Refrigerator Water Line replacement

An appliance malfunction was disrupting the kitchen routine, making it imperative to address the issue promptly. We conducted a thorough assessment to diagnose the problem and prepared to implement effective repairs in Modesto, CA. Our focus remained on delivering a reliable solution, ensuring optimal functionality for the appliance involved.

Refrigeration Repair

A malfunctioning cooler door hinge was affecting the operation of the reach-in cooler. We promptly replaced the right door hinge, ensuring that the door now opens and closes smoothly. This repair has restored the cooler to optimal functionality, eliminating any previous issues and enhancing overall performance.

Heat Pump Service/Repair

The compressor in the outside unit was not operating despite the thermostat being activated. We diagnosed a faulty dual capacitor and promptly replaced it with a new 45/5 dual cap. After completing the repair, the compressor ran smoothly, demonstrating optimal pressure. We also informed the customer about our maintenance plan and collected necessary signatures for billing.

Monthly Refrigeration PM

An ongoing issue in the monthly project management for clients in San Jose necessitated immediate attention. We effectively organized workflows, ensuring all project components were aligned and properly executed. Our meticulous approach laid the groundwork for seamless future operations, guaranteeing that timelines and objectives would be met without disruption.

HVAC Repair

At the Wondertreats Warehouse, we addressed concerns about insufficient heating. Upon inspection, we found that the air handler was incorrectly retrofitted with R-22 TXVs, reducing efficiency, and the electric heat strips were not connected. After wiring the heat strips, we charged the system with R-22, achieving optimal subcooling, and ensured the system now delivers supply air temps between 100-120 degrees.

Quarterly Refrigeration PM

We identified a compressor head fan failure during our quarterly PM service on the roof and floor condensers. Our thorough inspections included checking electrical components, amp draws, and conducting leak searches without detecting any alarms or faults. We recommend replacing the faulty compressor head fan to maintain optimal performance, ensuring the efficiency of the cooling system.

No Heat Service Call

Experiencing no heat from the furnace can be distressing, especially in colder months. We addressed this issue by replacing the faulty flame sensor, ensuring the furnace could properly ignite. After the replacement, we thoroughly tested the system and confirmed that the furnace is now delivering heat efficiently into the home without any problems.

When the tech arrived I explained that the call for heat on the thermostat had no effect unless I switched the stat to off and waited an hour or so. He found a corroded sensor and replaced it. Great service. I use ProEdge for all my HVAC issues.

No Heat Service Call

A malfunctioning heating system in Stockton CA left the space uncomfortable and ineffective. We thoroughly assessed the situation to confirm that no heating was occurring. Following our analysis, we provided guidance on potential next steps to address the issue for improved functionality. This consultation helps customers make informed decisions regarding their heating needs.

Walk in Cooler Repair

A malfunctioning walk-in cooler was causing operational disruptions. We diagnosed and repaired multiple issues, replacing a defective low pressure switch and recharging the system with R22 gas. After resolving an evaporator fan issue caused by a faulty fan thermostat, we ensured the cooler operates efficiently again. Further action will be needed to replace the fan cycle thermostat for optimal performance.

Appliance Repair

An appliance malfunction was impacting the customer’s daily routine. We conducted a thorough assessment to pinpoint the issue and provided solutions to restore functionality. Our technicians ensured that all tests and checks were performed on the appliance, leaving the customer with a reliable and efficient operation once again.

Quarterly Refrigeration PM

Ice machine functionality was at risk due to neglect, so we initiated preventative maintenance for all ice machines and reach-in units. We thoroughly cleaned the ice machines, removing ice to access and clean the bins, ensuring each unit resumed optimal ice production. Additionally, we checked temperatures and cleaned the coils of all reach-in units, confirming flawless operation with no issues found.

Quarterly PM

An issue with the rooftop unit (RTU) prompted a thorough preventive maintenance check. We completed a comprehensive inspection, replacing and washing filters, checking temperatures, and examining critical components like belts, capacitors, and motors. Additionally, we cleared condensate lines to ensure proper drainage, maintaining optimal performance of the RTU system in Modesto, CA.

Appliance Service

A safe installation was necessary due to previous theft issues. We drilled three holes through the concrete and tile to securely anchor the safe in the designated corner. After positioning the safe, we used lag bolts through its walls and set a concrete anchor on the floor. The entire setup was tested to ensure no movement, providing the client with peace of mind until a more secure option can be obtained.

Ice Machine Repair/Service

An ice machine in a shopping area was not functioning as expected, with no operational lights. We conducted a thorough diagnostic and discovered that the power switch had been turned off. After resetting the switch, the lights came on, restoring full functionality to the ice machine. This quick fix ensured the unit was operational again.

Came out and did an amazing job, I was very please with their customer service and communication. Our technician was Miller, he was very helpful and I highly recommend if you do go with this company, to ask specifically for him. I will be having this company as my go too for all my AC services. Thank you all for cooling our summer down. God Bless.

The technician who came out to check my AC unit was Professional, courteous, patient, gave me answers for my multiple questions while he worked

Quick response time and realistic advice for problem solving. They are honest even if it means they don’t get the job after all…Pro Edge seems to have my best interest in mind and what the best option is for me, not them. Highly recommend!!

Excellent service!

Jesus was our tech. He is very knowledgeable, friendly, and very courteous. Performed the necessary diagnostics and rendered some good advice based on his experience and helped with our decision to either repair or replace.

Jesus was an awesome technician. He attended my Dryer. He definitely deserves a raise for his professionalism honesty . Very polite and respectful too! Rare breed . Thank you Jesus and Pro Edge Services and Training ,Inc

Called on Friday evening and they came out Monday morning and fixed my heater. Thanks Chuck and Aaron!

Great service. Replaced a difficult belt on our clothes washer.

Great and friendly service as well as pricing.

I am just beginning a project, so far I am impressed with their willingness to help me make sound choices. No high pressure sales tactics. Kenny showed up when scheduled and kept me informed as to any changes in his plans

Jesus came through for my family and I. He was prompt, very informative and professional. My refrigerator had stopped working and I was overwhelmed with a party that I’m planning for the weekend. He gave me peace of mind explaining exactly what was wrong with the appliance. The price was fair and didn’t break my wallet. I would definitely use Pro Edge again in the future. Thank you! 🙏

Excellent service and helpful information on refrigerators!!! Thanks!!!

Excellent service and helpful information on refrigerators!!! Thanks!!!

Quick, thorough and professional. I will use them again and would definitely recommend them to friends and family.

Anthony did a great job fixing my dishwasher and washing machine, and he was super kind and patient explaining the problems to me!